Description
Woodcraft’s FZ-07 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. The 1.5″ riser setups can only be run in the “up” position due to tank clearance
Rise Guide
1 inch rise, up position – 2.75″ drop
1 inch rise, down position – 3.75″ drop
1.5 inch rise, up position – 2.25″ drop
Pullback Angle
22.5 degrees
Clip-on Dimensions
0.875″ OD x 0.625″ ID
10 mm (0.393″) offset spacers can be purchased separately to move the bars further forward (shown in photos). Please note that this kit provides numerous mounting options that may not work with all available brake line kits, master cylinders, or clutch lines. Modifications may be required depending on your setup and are not the responsibility of Stoltec Moto or Woodcraft. This setup is NOT compatible with the factory bar ends! We offer Woodcraft bar ends w/ sliders to match our frame sliders.
Reviews
There are no reviews yet.